In Uganda, different types of Cement bricks are used extensively for building and construction activities. Compared to other construction material, it is expensive to transport cement bricks over longer distances because of the large volume of the bricks, cost of loading, unloading and damage during transportation. Hence many businesses in Uganda are interested in purchasing automatic brick making machine in Uganda which will allow them to make bricks quickly and automatically with minimal manpower, so that they can sell the bricks to builders and construction firms in the area.
Different types of bricks machine in uganda
It should be noted that different types of bricks can be made using machines depending on the mold which is being used. The standard brick is solid and is easier to manufacture. The perforated brick uses less material, and the number of bricks produced is less for the same machine. The hollow brick uses the least amount of material, yet the production rate of these bricks is the lowest. Though rectangular bricks are the most common shape of the bricks available, the bricks can be made in different shapes depending on the demand for the bricks, by using a suitable mold.
There are multiple stages in making bricks from cement raw material. The cement is stored in the silo and is transported using a conveyor to the batching section. It is then mixed with the various other raw materials to make the mixture required to make the brick.The mixture is then conveyed to the brick press section where pressure is applied to make the brick. One of the most important parameters which determines the output of the machine is the time taking for forming a brick. Most manufacturers will specify the time taken for forming a brick, usually in seconds. The brick is then dried, and moved to the stacking area where it is stored
Different dimension
![](http://www.wallaceengineco.com/wp-content/uploads/2019/05/QT4-15-automatic-brick-machine.jpg)
The machines for making bricks differ in the dimensions of the pallet and the number of blocks in the pallet which which they can process. The lower capacity machines have fewer blocks in the pallet, and their hourly output will be less, while the high capacity machines will be able to process more blocks in each pallet. Each machine can process different types of bricks depending on the mold which is being used. However the number of hollow bricks which will be produced will be significantly lower than the standard bricks which can be made using the same machine because the design is more complex and hollow bricks are also larger in size.
Semi automatic type is with affordable price
Though semi-automatic machines for making bricks are available at a lower price, they require more labour which is recurring expense. Hence many buyers of machines for making bricks are preferring to purchase fully automatic machines, though they may require a higher initial investment. In addition to saving money on paying labor expenses daily or hourly, the other advantage of automatic machines is that the possibility of human error is greatly reduced, and there is less wastage of material. The business also does not have to waste time and effort in training the laborer.
Typically the fully automated machine for making bricks can be fully controlled by a single operator: https://aimixconcreteblockmachine.com/brick-making-machine-uganda/, who can monitor the process and change the settings as required. Sensors will be incorporated at every part of the machine, to monitor the temperature, and other settings. A control desk will be provided in front of the machine where the operator can monitor all the parameters of the machine, and take corrective action if any kind of problem is observed. These machines have programmable logic controllers, or PLCs which are programmed to deal with various inputs,settings for the machine.
There are a number of manufacturers of automatic machines for making bricks and before purchasing a particular machine it is important to consider the various parameters before taking a decision. In addition to the initial investment requirement, it is also important to compare the output of the machine for different companies. A machine with a higher productivity is likely to be more expensive than a low output machine. The raw material required like cement, water and the time taken for forming a brick should also be compared. The power consumption of the machine will also determine the cost of using the machine.